Striker TSM18 & TSM24
Tracked Stacker Features
Conveyor Truss - The conveyor truss consists of heavy-duty lattice structure framework that is lightweight and strong. The telescopic legs are hydraulically adjusted to allow the conveyor to work in various positions and for ease of maintainence. The belt is driven via a hydraulic drive motor and is 1000mm wide, troughed belt conveyor with a fixed tail section and hydraulically folding head section. The head section folds to allow the complete conveyor to be transported on the back of a truck.
Feed Hopper – The feed hopper is the manufactured from mild steel and lined with Hardox 400.
Track Frame – The track is manufactured from heavy-duty frame steel having 2.9m longitudinal centres along with 400 wide tracks as a standard with an overall track width of 2.5m.
Powerpack - CATERPILLAR model C7 engine with electronic governing and emission control powers the plant. The engine and power pack are housed in an engine compartment that can be easily accessed form both side to allow maintenance to the engine and hydraulic systems.
Conveyor Belt & Related Items - The conveyor belt consists of multiple layers of reinforced nylon ply encased are rubber covers, with the carry side providing the thicker cover for longer wear life.
Bolt up type take up rods allow the ability to tension and loosen the belts with the adjusting taking place on the tail pulley shaft located in heavy duty bearings on slide rails. The head and tail pulleys fabricated and machined from nominal pipe according to Striker standards and specifications required and lagged to provide greater traction to the belt.
Supplied on all Striker track stackers are two belt scrapers which each have easily replaceable rubber blades. One scraper is positioned at the head end of the conveyor scraping the dirty side of the belt while the other is a vee type situated just before the tail pulley preventing spilt material from becoming caught between the belt and tail pulley. Included in the package is the conveyor is fully guarded to mines department regulations.
Idlers – Three roll trough idlers are the main carrying idlers on the conveyor. The number off these is dependent on the length of the conveyor, but otherwise they are equally spaced up the truss (optional adjustable transition idlers are also available). Positioned at the tail, underneath the receival hopper, are impact idlers. These help with absorbing some of the shock taken from loading. On the return side of the belt, suitable sized return steel rolls are strategically placed on the underside of the conveyor and have individual easy replacement properties.
Options - Special features are available depending on the client’s requirements. A few examples; A conveyor weigh scale, extended hopper wings, fire suppression.