Striker LDQ-15

Download Brochure (429)

TRACK PLANT FEATURES

Striker LD Series radial stackers have high capacity stockpiling abilities. They are strong and economical to run with no complicated foundation work and literally have a quick set up time of typically under 1 hour.

Conveyor Main Frame - The conveyor main frame is lightweight and strong. Striker conveyors are constructed from welded RHS and plate. The conveyors also have the ability for the end sections to fold for improved transportability.

Conveyor Belt & Related Items - The conveyor belt consists of multiple layers of reinforced nylon ply encased of rubber covers, with the carry side providing the thicker cover for longer wear life. Bolt up type take up rods allow the ability to tension and loosen the belt with the adjusting taking place on the rails. The head and tail pulleys fabricated and machined from nominal pipe accroding to Striker standards and the head pulley is lagged to provide greater traction to the belt.

Supplied on all Striker conveyors are two belt scrapers which each have easily repalceable rubber blades. One scraper is positioned at the head end of the conveyor scraping the dirty side of the belt while the other is a vee type situated just before the tail pulley preventing material from becoming caught between the belt and tail pulley.

Idlers – Three roll through idlers are the main carrying idlers on the conveyor. The number off these is dependent on the legth of the conveyor, but otherwise they are equally spaced up the main frame. On the return side of the belt, suitable sized return steel rolls are strategically placed on the underside of the conveyor.

Mobility & Stockpiling Information – Each conveyor has different stockpiling capabilities. Such variations as width, length and material are all factors to the size of a stockpile. Depending on the model, the conveyor is mounted on two swiveling wheels and a pivot at the tail end to give radial stockpiling through and arc of approximately 300 degrees. The main conveyor frame can be raised or lowered with the help of a hydrualic lifting cylinder, allowing the conveyor to alternate stockpiling heights.

Options – For options that are available to the client, refer to the following.
-Radial drive – hydraulic folding – Weigh scales – Tungsten scrapers – Covers